the name was misleading because the function could do more than just
download package list. In PushComposeRequest it is also used to fetch
checksums for the repositories, therefore I decided to rename it to
reflect this usage.
If the Epoch is > 0 the it should be added to the front of the version,
separated by a colon.
Also include a depsolve package with a non-zero Epoch and adjust the
tests accordingly.
Without making a deep copy of the blueprint the changes made to the
package and module versions will persist in memory, causing it to lose
the package and module version globs.
This can be seen by executing a freeze request and then a depsolve. The
blueprint included in the depsolve had the version globs replaced by the
frozen EVRA values.
This adds the modules to the list of package specs to be depsolved. It
includes a new function to build the version glob package string, as
well as tests for the new function and for depsolving with modules in
the blueprint.
This adds support for the modules field. It moves the version
replacement into a separate function, setPkgEVRA, and adds tests for the
new function as well as for blueprints with packages in both the
packages and modules lists.
The dependencies are not sorted, so depending on what order they were
returned in the freeze route would or would not return the correct
results (exhibited by the version being the original glob instead of the
EVRA).
This also fixes the tests so that the depsolve results are slightly
unsorted by adding a dep-package3 to the start of the list.
This is unused for now, but will allow us to generate pipelines with
the pre-depsolved NEVRAs, so osbuild does not need to depsolve again.
Signed-off-by: Tom Gundersen <teg@jklm.no>
The packag selection shown in the UI does not include the base
packages that will be included in the image, and they cannot,
because the base packages depends on the output type, and the UI
packages shown in the UI are independent of the output type.
It is possible to select packages incompatible with the base
packages. Discover this sooner rather than later, by including
the base packages in the final depsolve before creating the
pipeline.
In the future the result of the depsolve will be used to create
the pipeline, so this is another prerequisite for moving from
the dnf to the rpm stage.
Also depsolve the build packages for the same reason. Note that we
always set clean to false in this case, as the depsolving of the
main packages would have performed any cleaning necessary.
Also extend dnf-json to support excluding packages from depsolving.
Signed-off-by: Tom Gundersen <teg@jklm.no>
We must avoid depending on the host's state in any way. This achieves
isolation in the following ways:
- rather than the default config file /dev/null is used
- rather than sharing the host persistent state dir a temporary one
is used and thrown away for each call
- the module_platform_id is set explicitly per supported distro, rather
than taken from /etc/os-release.
Optionally, the cache directory can be configured, as we may want to keep
this separate from the host, if for no other reason than accounting.
However, the cache appears to be well-behaved, so we can keep sharing
it between calls (or even with the host). This speeds up things
considerably, so this is definitely what we want.
Signed-off-by: Tom Gundersen <teg@jklm.no>
In our base distro definitions we exclude packages in addition to
including them. Extend dnf-json to support this, so we can depsolve
the base package set as well as the packages added in blueprints.
Signed-off-by: Tom Gundersen <teg@jklm.no>
When support for osbuild result was added into osbuild-composer it was in
a bit hacky way - localtarget's location was reused as a path for the
result. This didn't make much sense because we want to store the result
even when image build has no localtarget.
Several past commits made store less dependant on the localtarget. The
responsibility for "holding the paths" to build artifacts was gradually
switched from the localtarget to the store while still maintaining
backwards compatibility - localtarget.Location still pointed at the
correct location.
This commit finishes the switch: local target now has no Location field.
The store is now fully responsible for managing the artifacts and paths
to them. LocalTarget is now just a simple "switch" - if image build has it,
then worker uploads an image into the store and it's then available for
download using the weldr API.
In #221 Compose was refactored: Now it can have multiple image builds. More
image builds result in more jobs. Each job has its own result (logs from
osbuild). Additionally, also targets are now a part of image build. With
local target this effectively means we can have multiple images per compose.
However, these artifacts (images & results) were stored only per compose
prior this commit, thus rendering the behaviour of composes with multiple
image builds undefined and racy.
This commit fixes it by storing all the artifacts per image build instead of
per compose. To achieve this feature, getComposeDirectory and
getImageBuildDirectory methods were created to centralize the path assembly.
Paths to artifacts prior this commit:
${COMPOSER_STATE_DIR}/outputs/${COMPOSE_ID}/*
Paths to artifacts after this commit:
${COMPOSER_STATE_DIR}/outputs/${COMPOSE_ID}/${IMAGE_BUILD_ID}/*
Everything that this field contained can be computed in another way:
- path: just lookup the local target and read the path from there
- mime: can be derived from distribution and compose output type
- size: can be derived from the path
Therefore it imho doesn't make much sense to store these information multiple
times.
There's no connection between user-specified image size and actual image
size (which might differ du to a compression). Therefore, it's not needed
to check if the actual image exists if we want to return just the
user-specified size.
When requesting the compose status, a user may want to filter the list
of composes by blueprint name, compose status, and/or compose type. These
filters can now be set in the /compose/status route's url as the queries
blueprint, status, and type.
The compose now contains multiple image builds, but Weldr API does not
support this feature. Use the first image build every time.
Also start using the new types instead of plain strings.
When a user does not define the image size for a compose the default
image size of that image type is used. In order to properly store the
compose's image size even if the default is used the store calls the
distro function GetSizeForOutputType. This function accepts an output
format and image size. If the image size is 0 then the default
value for the output format will be returned. Also, for vhd images the
size must be rounded. This is now handled in the distro function instead
of the api.
When a use defines the image size for a compose this size is stored in
the compose struct so that the virtual image size can be returned by the
api instead of the file size of the image.
When creating a compose the desired image size can be set. If the image
type is a VHD the image size is rounded up to the nearest MB since all
VHDs on Azure must have a virtual size aligned to 1 MB.
We were using fedora-30 as a test-distro and tar as test-output, but
that causes lots of churn in the tests when we refactor things. Use
the test distro instead, when generic functionality is being tested
and restrict testing of the individual distros to the distro-specific
tests.
Signed-off-by: Tom Gundersen <teg@jklm.no>
Introduce a DistroRegister object. For now this does not introduce
any functional changes, as the object is always instantited to be
the same. However, in follow-up patches it will get options.
Signed-off-by: Tom Gundersen <teg@jklm.no>
Commit b1c5ef2a introduced support for retrieving logs from osbuild.
This commit finishes the second part - actually returning the logs
from /compose/logs route.
dnf-json relies on dnf's ability to cache repository metadata. This is
important, because the API calls it quite often to serve requests for
package lists and depsolves.
However, osbuild's dnf stage always fetches new metadata, because it
doesn't have access to the host's cache. Since metadata is valid for
some time, even after a repository changed, the checksum we put in
the pipeline might be old.
Force a new metadata download when producing the pipeline. This is still
not perfect, but greatly reduces the probability of putting stale
metadata into the pipeline.
When restarting composer, we were not handling the compose states
correctly.
This resolves that as follows:
* any running composes are marked as failed,
* any waiting composes are put back in the pending jobs queue
As a consequence of needing the ability to reinitialize the job
queue, we must include the depsolved pipeline in the compose object.
This is the correct thing to do, as the semantics we currently
adhere to is that pipelines are depsolved when the compose is
started (and restarting composer should not affect this by for
instance re-depsolve the pipeline).
Resolves rhbz#1784062.
Signed-off-by: Tom Gundersen <teg@jklm.no>
Allow bootloader specific packages to be defined per architecture,
and allow repositories to depend on the architecture.
This does not altert he pipelines we produce, part from the ami
image now contains the grub2-pc package, rather than the grub2
package. This should make no difference.
Signed-off-by: Tom Gundersen <teg@jklm.no>
The pipeline generation now takes the architecture as an argument.
Currently only x86_64 is supported. The architecture is detected
at start-up, and passed down to each pipeline translation.
For osbuild-pipeline we now requrie the architecture to be passed
in.
Signed-off-by: Tom Gundersen <teg@jklm.no>
Instead of having a static repository checksum, set it dynamically from
the metadata that osbuild-composer last saw. This is implemented in
dnf-json, which returns the checksums for each repository on every call.
This enables the use of repositories that change over time, such as
fedora-updates. Note that the osbuild pipeline will break when such a
repository changes. This is intentional: pipelines have to be
reproducible.
Prior to this commit outputs directory used by local target was owned by root.
This made impossible for osbuild-composer to delete images. (osbuild-composer
doesn't run as root).
This commit introduces state directory in which osbuild-composer creates
outputs directory. Because this directory is owned by osbuild-composer, it's
able to delete files inside.
The implementation is just a stub returning always the same tar archive.
The ability to return actual logs will be implemented in the future - osbuild
isn't currently returning any logs.
Prior to this commit blueprint getters looked like C-style API with output
parameters. This commit refactors them to more conventional multiple return
values API.
As a part of f4991cb1 ComposeEntry struct was removed from store package.
This change made sense because this struct is connected more with API than
with store - store uses its own Compose struct. In addition, converters
between Compose and ComposeEntry were added. Unfortunately, ComposeEntry
contains ImageSize which was not stored in Compose but retrieved from store
using GetImage method. This made those converters dependent on the store,
which was messy.
To solve this issue this commit adds image struct into Compose struct.
The content of image struct is generated on the worker side - when the worker
sets the compose status to FINISHED, it also sends Image struct with detailed
information about the result.
