Unfortunately, `which` does not seem to be installed by default on our
F41 CI images. Instead of doing the dance with rebuilds, which has been
problematic recently, let's not rely on `which` in scripts any more,
since we can replace it with the Bash built-in `type` command.
Signed-off-by: Tomáš Hozza <thozza@redhat.com>
Adjust the test case to cope with the SPDX SBOM documents uploaded to
the Koji. Also explicitly check that there is the expected number of
SBOM documents uploaded as the image build output.
Signed-off-by: Tomáš Hozza <thozza@redhat.com>
Where applicable, modify all repo config filenames to use a dot
to separate the release major and minor version. Modify test cases
to not remove dot from the distro version any more.
Existing tests will be extended (or new tests added) to explicitly test
backward compatibility and ensure that using old distro names without a
dot still works.
Signed-off-by: Tomáš Hozza <thozza@redhat.com>
Include the osbuild version used to build the image, in the image extra
metadata attached to the Koji build and image output.
Extend `koji.sh` to verify that the version is set and of the expected
value.
Signed-off-by: Tomáš Hozza <thozza@redhat.com>
Test the content of manifest outputs extra metadata and that they are
the same as the metadata attached to the build extra metadata.
Signed-off-by: Tomáš Hozza <thozza@redhat.com>
Expose the osbuild information used to produce the image, in the image
extra metadata under the `osbuild_artifact` property.
This information will get included in the image / build extra metadata
and make it explicit how to reproduce the image build using osbuild and
the attached manifest.
Signed-off-by: Tomáš Hozza <thozza@redhat.com>
Add any non-Koji upload target results attached to an OSBuild result, to
the image extra metadata. This will make it easy to locate any image
from Koji uploaded to cloud, in the target cloud environment.
The rationale behind including only non-Koji target results is that one
can find it only in Koji, so there is no added value in including the
Koji target results at all.
Extend the `koji.sh` to check the target results in image metadata when
testing Koji scenario with cloud upload.
Signed-off-by: Tomáš Hozza <thozza@redhat.com>
Import osbuild manifest and build log to the Koji build as outputs. Also
note the respective filenames in the image output extra metadata.
Note that the osbuild manifest is imported as a log file for now. Koji
has very limited set of output types defined and I still need to
determine the best way to use a custom output type in Koji instances (as
other content generators do).
Signed-off-by: Tomáš Hozza <thozza@redhat.com>
Refactor koji.sh:
- Store Koji hub URL in a variable and use it instead of a literal.
- Do not inspect builinfo output and don't parse it using grep and sed,
but instead directly call Koji XMLRPC functions (using `koji call`)
with JSON output.
In addition, test that the image archive extra metadata are the same as
those stored in the build extra metadata, stored under the image
filename.
Signed-off-by: Tomáš Hozza <thozza@redhat.com>
Also extend the Koji test case to verify that the boot mode information
is in the build extra metadata and that it contains valid value.
Signed-off-by: Tomáš Hozza <thozza@redhat.com>
Expose the extra metadata information for each image output stored in
`ImageExtraInfo` also in the build extra metadata. The extra metadata
for each image is nested under key corresponding to the image filename.
Extend the Koji test case to check information in the buildinfo output
and specifically check for all expected metadata in the build Extra
metadata field.
Signed-off-by: Tomáš Hozza <thozza@redhat.com>
Since we're sharing functions between test scripts, move greenprint(),
the most rewritten function in the history of the project, to
shared_lib.sh and source it everywhere.
some scripts skip the test if it's not supported for that
distro-version. Disable them in gitlab-ci.yml so we don't waste CI
resources.
To disable them, we are using the `rules` on each job with a regex
pattern. Using `=~` (pattern matches) as a WHITELIST and `!~` (pattern
does not match) as a BLACKLIST.
Extend the `koji.sh` test case to allow also testing the upload to
cloud, in addition to the testing that it supports currently (building
of multiple images in one Koji compose request).
The script now reuses some common functions used by the `api.sh` test
case. Once the Koji compose succeeds, the script verifies that the image
is present in the appropriate cloud environment using a CLI tool. No
additional testing of the image is done, it is not booted.
The fix is already in Koji 1.27.1 which should be available in all downstreams
we are testing against.
See https://src.fedoraproject.org/rpms/koji
Signed-off-by: Ondřej Budai <ondrej@budai.cz>
The commonly used 'greenprint' function now adds a date + timestamp to
each message for debugging and tracking the duration of segments of each
scripts.
We use the koji API to build RHEL nightlies, therefore we should build
only development versions in the testsuite.
Signed-off-by: Ondřej Budai <ondrej@budai.cz>
Using DISTRO_CODE simplifies test case selection and allows to test
different distro than the one test is running on.
This is used to run tests for RHEL 9.0 on F33 or RHEL 8.4
The tools/provision.sh script is sourced by all test cases and it sets
up the system and software for running test cases. As part of the setup,
it copied over the whole content of test/data/composer/ to
/etc/osbuild-composer. However the source directory contains not only
osbuild-composer's configuration, but also configuration for the worker.
The worker however expects its configuration in /etc/osbuild-worker.
The fact that provision.sh does not copy the worker configuration to the
correct directory didn't affect the CI, because the only test case that
relied on it is koji.sh, which copies the worker configuration
explicitly.
Move osbuild-worker test configuration to a separate 'test/data/worker/'
subdirectory. Also install the osbuild-worker test configuration to its
own subdirectory in the "-test" RPM.
Move the copying of worker configuration to the correct destination
directory from koji.sh to provision.sh, so that all test cases can rely
on the system being set up properly. Do not use wildcard for copying
osbuild-{composer,worker} configuration files, but explicitly copy each
file to its respective destination directory.
Signed-off-by: Tomas Hozza <thozza@redhat.com>
The image definition is shared with the latest RHEL 8.y one (8.4 currently).
I expect that we the introduction of 8.5 support, we point the centos 8
distro at it.
The test repositories and manifests use the official CentOS composes. From
what I can tell, they are persistent. This is not guaranteed though, so we
might need to switch to RPMRepo at some point.
The "classic" CentOS 8 should also be buildable but due to the chicken and egg
issue (this commit will get into Centos "8.4" but Centos "8.4" isn't a thing
yet), we cannot test it and therefore it might be broken.
Signed-off-by: Ondřej Budai <ondrej@budai.cz>
rhel 8.4 tests are added. The configs are based off of those used for
rhel 8.3. The Schutzbot Mockbuild, Base, Image, Integration, and OSTree
tests are added for 8.4. Repo overrides are added for the rhel 8.4 tests
so that the tests use rpmrepo snapshots.
The mockbuild uses the jenkins rhel84-nightly-repo credential to
override the rhel mock template's repos with rhel 8.4 nightly repos.
These repos are stored in a credential because they are internal links.
The image tests and koji tests need a special distro selector since the
rhel-8 test cases are only for rhel 8 versions less than 8.4. The rhel
8.4 tests are named with the rhel-84 pattern whereas the other rhel 8
versions have the rhel-8 pattern.
Also, instead of having only rhel-8 and rhel-8-beta repo configs for the
tests, we now have a specific repo config for each rhel release we test.
The repo is also now pulled from an rpmrepo snapshot. For whichever
distro is being tested, the approriate repo config will be copied to
/etc/osbuild-composer/repositories as rhel-8 and rhel-8-beta since this
is the naming osbuild-composer looks for. For testing purposes, the
rhel-8 and rhel-8-beta repo should be the same since eventually all rhel
releases will go from beta to not beta. The fedora repo overrides are
already done in tools/provision.sh so the rhel override is set there as
well. Currently, only rhel 8.4 requires an override.
We have several repository definitions across the tests which is quite messy.
This commit switches the Koji test to use the "central" repository configs defined in test/data/repositories/
We don't install any packages in test cases anymore, therefore we don't need
to install EPEL there.
A slightly different explanation:
osbuild-composer-tests depends on packages from EPEL on RHEL. Therefore, you
cannot run the test cases without EPEL installed. Therefore, there's no
point in installing EPEL there.
The Koji test in Github actions was always a bit quick and dirty solution.
I think it's much nicer solution to run it on Schutzbot.
Therefore, this commit moves the koji_test.go to a new osbuild-koji-tests
executable. This new test isn't run in the base test suite as one would
anticipate but inside the koji.sh test. This is needed because
osbuild-koji-tests requires a running koji instance. This might change
in the future but I think it works for now.
Attempt to clarify the structure of our tests. Each test case is now
encapsulated in a script in `test/cases`. Each of these scripts should
be runnable on a pristine machine and be independent of each other. It
is up to the test-orchestractor to decide if they should be run
consequtively instance, or in parallel on separate instances. Each
script can execute several tests and call whatever helper binaries
is desired. However, each case should be assumed to always run as one.
