Update the osbuild/images to the version which introduces "dot notation"
for distro release versions.
- Replace all uses of distroregistry by distrofactory.
- Delete local version of reporegistry and use the one from the
osbuild/images.
- Weldr: unify `createWeldrAPI()` and `createWeldrAPI2()` into a single
`createTestWeldrAPI()` function`.
- store/fixture: rework fixtures to allow overriding the host distro
name and host architecture name. A cleanup function to restore the
host distro and arch names is always part of the fixture struct.
- Delete `distro_mock` package, since it is no longer used.
- Bump the required version of osbuild to 98, because the OSCAP
customization is using the 'compress_results' stage option, which is
not available in older versions of osbuild.
Signed-off-by: Tomáš Hozza <thozza@redhat.com>
Add an array of targets in the imageRequest and return an array from
ImageRequest.GetTargets() (renamed from GetTarget()). Currently, the
function still only returns one target, the default for the image type
with the top level upload options.
Include the osbuild/images module version in the Manifest job result.
The module has direct impact on image definitions and the content of
produced manifest, therefore including this information in the Manifest
job result is very helpful for various purposes (debugging,
traceability).
This will enable to embed this information in the Koji build metadata.
Signed-off-by: Tomáš Hozza <thozza@redhat.com>
Extend the Manifest job result structure to hold information about
osbuild-composer version, which produced the manifest. This will be
useful for other job types which depend on it and can then push this
information further as needed.
Signed-off-by: Tomáš Hozza <thozza@redhat.com>
Remove all the internal package that are now in the
github.com/osbuild/images package and vendor it.
A new function in internal/blueprint/ converts from an osbuild-composer
blueprint to an images blueprint. This is necessary for keeping the
blueprint implementation in both packages. In the future, the images
package will change the blueprint (and most likely rename it) and it
will only be part of the osbuild-composer internals and interface. The
Convert() function will be responsible for converting the blueprint into
the new configuration object.
The duration middleware should come after the tenant channel middleware,
otherwise the tenant in the context will be empty. The status middleware
can come beforehand because it queries the request context right before
sending a response.
Use ostree.ImageOptions for the request parameters instead of a
SourceSpec on the imageRequest.
When preparing the image request, add the ostree values from the API's
compose request to the ostree options on the image options of the image
request.
It's not necessary to create a source spec and it's also not necessary
to add the default ref when it's not specified in the request for an
ostree-based image type. Both of these will be handled by the Manifest
generation based on the ostree options (imageOptions.OSTree). The image
functions will take care of setting any missing parameters or returning
errors if any required parameters are missing.
Do not expose the content of the manifest statically and instead rely on
the public methods to retrieve source specifications dynamically.
Since the methods require iterating through the pipelines to collect
source specifications, we should avoid calling the function multiple
times when we can reuse the returned values.
Initialise the manifest only once in the enqueue functions
(ImageType.Manifest()) and pass it to the manifest generation function
with the workers and the dependency IDs. The function is renamed from
generateManifest() to serializeManifest() to reflect its new
functionality more accurately. The arguments to the function have also
been trimmed since we no longer need the image type, blueprint, and
image options.
The new functionality of the function is to collect all the resolved
content from the workers and serialize the manifest object.
Use the container sources provided by the content on the initialised
manifest instead of the blueprint to resolve containers. The container
sources on the manifest are a map keyed by the name of the pipeline that
will use the resolved containers, but the worker's container resolve job
works on a slice, so we reread the content map to get the pipeline name
(instead of taking the first payload pipeline from the image type).
This requires that there be only one pipeline that embeds containers,
which currently true of all our image types.
Use the commit sources provided by the content on the initialised
manifest instead of the image options to resolve commits. The ostree
sources on the manifest are a map keyed by the name of the pipeline that
will use the resolved commit spec, but unlike with the package sets, the
worker's commit resolve job works on a slice, so we reread the content
map to get the pipeline name. This requires that there be only one
pipeline that requires a resolved ostree commit, which is currently true
of all our image types.
Setting the default ostree ref on the image options before calling
Manifest() isn't needed anymore.
The FetchChecksum on ostree.ImageOptions was the resolved commit ID of
the parent ref to be pulled (for ostree commits and containers) or the
commit ID of the content ref (for ostree installers and raw images).
With the new process of manifest creation and serialisation, using the
image options to transport resolved content references is bad and
confusing. Image options should only reflect user and image type
options before any references are resolved. With this change, the
ostree.ImageOptions should only reflect the ostree-related options
specified by the user. Commit IDs will only be available after the
manifest is initialised when the commit sources are resolved (before
serialisation).
Before, this was done in the PackageSets() function.
The reason for this is that having an ostree ref affects package
selection (for example, it adds rpm-ostree). At the package selection
phase, it doesn't matter what the ostree ref is; it is just used to
determine if a pipeline is for an ostree-based image type and it doesn't
affect non-ostree-based image types because the image functions ignore
it.
This is only needed in the cloudapi now because other places have
switched to using the new order of operations, where the manifest is
generated after the ostree commit is resolved, so it's always added when
needed.
To add the container specs to Serialize(), we need to map them to the
payload (OS) pipeline. We assume the first name in the image type's
PayloadPipelines() list is the OS pipeline, which is true of all image
types right now but might not be necessarily in the future.
This is a temporary workaround. Eventually, the mapping will be set by
the image type itself when we use the container source specs attached to
the Manifest object.
Still not using the new process for generating the manifest exactly.
This commit only replaces the call to PackageSets() with a call to
Manifest() to get the Content.PackageSets. This is essentially the same
as before, when we were initialising the manifest object twice.
The Manifest() function does a tiny bit more work than PackageSets(),
but it's minimal and we gain the benefit of only having a single code
path and, although it's run twice, it's always run in the same way.
Pass the entire Blueprint to Manifest() instead of just the
Customizations. The goal is to combine the functionality of the
ImageType.PackageSets() and ImageType.Manifest() methods into one call.
Return manifest.Manifest from the Manifest() function without
serializing. The caller then has to call the manifest.Serialize()
function using the depsolved packages.
This moves towards changing the order of actions required to generate a
manifest. With this change, the manifest creation and depsolving can be
done independently, but this still requires instantiating the manifest
object twice (InstantiateManifest() is called in PackageSets() and
Manifest()), which we don't want to have to do.
Add the ListDigest to the container Spec struct and all its copies so we
can store list digests when they are available and pass them on to the
appropriate osbuild stages, sources, and inputs.
Copy the value whenever a spec is moved to a different representation.
This changes the `Manifest` function of the `ImageType`
interface so that any warnings detected during the
`checkOptions` step of the manifest initialization can
be propagated back to the Weldr-API (see next commit).
Signed-off-by: Irene Diez <idiez@redhat.com>
After introducing Go 1.18 to a project, it's required by law to convert at
least one method to a generic one.
Everyone hates IntToPtr, StringToPtr, BoolToPtr and Uint64ToPtr, so let's
convert them to the ultimate generic ToPtr one.
Signed-off-by: Ondřej Budai <ondrej@budai.cz>
Register the custom middleware function to the cloudapi
server. This function is responsible for recording all
the status codes of all the server's endpoints.
Koji clean-up doesn't delete the top-level directories. As we named every
top-level directory different, they were just cumulating on kojihub, which
is obviously wrong.
This commit changes that behaviour to put all the temporary directories under
a new osbuild-cg top-level one. This way, osbuild-cg won't ve ever cleaned,
whereas osbuild-cg/osbuild-composer-koji-{UUID} will be, which is exactly
what we want.
Closes: https://github.com/osbuild/osbuild-composer/issues/3064
Signed-off-by: Ondřej Budai <ondrej@budai.cz>
Add support for embedding container images via the cloud API. For
this the container resolve job was plumbed into the cloud api's
handler and the API specification updated with a new `containers`
section that mimics the blueprint section with the same name.
The ellipsis operator was used as a hack to not need to pass any details
as an argument, but it makes what the end object will actually look like
less obvious. It also makes it impossible to pass an array to details
without getting a nested array.
Fixes#2874
Since the `jobStatus` functions return a `JobInfo`
struct that contains the `JobStatus`, it makes sense
to rename the function names for the sake of consistency.
The number of return values from the `jobStatus`
function was growing and getting out of hand. Not
all return values were being used in all cases
and so returning a single struct with the information
and status of a job makes more sense. Then in each case
the resulting fields can be used as needed.
Add support to handle upload options in image requests for Koji
composes. The image is always uploaded to Koji, but now it can be
uploaded to the cloud environment in addition to Koji as part of the
build.
The image name used for Koji image can't be used as is for uploading to
the cloud, because each cloud provider has its own requirements for the
valid characters. For now, let the Cloud API implementation generate a
random image name. The name is always returned in the compose status's
upload status, so it should be possible to attach it to the Koji build
to allow users to find the image.
This is the first step to support embedding container images. Here
we add the `containers []container.Spec` argument to supply images
with resolved container specifications. For now all distros will
return an error in case a container is actually supplied since none
of them currently support embedding containers. NB: also no apis or
tools will actually resolve containers.
The package sets for an image can depend on the blueprint, and
by the same logic there is no reason it should not be able to
depend on the image options.
This is so far a non-functional change, but makes a follow-up
commit simpler (though still without actually depending on
the image options to compute the package sets).
The osbuild export is specific to the upload target and different
targets may require using a different export. While osbuild-composer
still does not support multiple exports for osbuild jobs, this prepares
the ground for such support in the future.
The backward compatibility with older implementations of the composer
and workers is kept on the JSON (Un)mashaling level, where the JSON
message is always a super-set of the old and new way of providing the
exports to osbuild job.
The filename of the image as produced by osbuild for a given export is
currently set in each target options type in the `Filename` struct
member. However, the value is not really specific to any target type,
but to the specific export used for the target. For this reason move the
value form target type options to the `Target` struct inside a new
struct `OsbuildArtifact` under the name`ExportFilename`.
The backward compatibility with older implementations of the composer
and workers is kept on the JSON (Un)mashaling level, where the JSON
object is always a super-set of the old and new way of providing the
export filename in the Target.
When the Koji target support was added to the osbuild job, based on the
osbuild-koji job, the meaning of target option values got messed up.
The side effect of the issue is that when Koji composes are
submitted via Cloud API the resulting image is currently always uploaded
back to the worker server.
`OsBuildKoji` job
-----------------
- `OSBuildKojiJob.ImageName` is set to the filename of the image as
exported by osbuild.
- `OSBuildKojiJob.KojiFilename` is set to the desired filename which
should be used when uploading the image to Koji.
`OsBuild` job + `KojiTargetOptions` before
------------------------------------------
- `OSBuildJob.ImageName` is set to the filename of the image as exported
by osbuild. This is done only by the Cloud API code for Koji composes.
Cloud API does not set this for regular composes and any other target.
The variable is set in common case only by Weldr API code with the
same meaning and it is used by the `OsBuild` job implementation as an
indication that the image should be uploaded back to the worker server.
- `Target.ImageName` is not set at all. Other targets use it for the
desired filename which should be used when uploading the image to the
target environment.
- `KojiTargetOptions.Filename` is set to the desired filename which
should be used when uploading the image to Koji. All other target
types use `Filename` variable in their options for the filename of the
image as exported by osbuild.
`OsBuild` job + `KojiTargetOptions` after
-----------------------------------------
- `OSBuildJob.ImageName` is still set to the filename of the image as
exported by osbuild. This is kept for a backward compatibility of new
composer with older workers.
- `Target.ImageName` is set to the desired filename which should be used
when uploading the image to Koji.
- `KojiTargetOptions.Filename` is set to the filename of the image as
exported by osbuild.
This change is backward incompatible, meaning that old worker won't be
able to handle Koji compose requests submitted via Cloud API using a new
composer and also a new worker won't be able to handle Koji compose
requests submitted by a new composer. This is intentional, because after
discussion with Ondrej Budai, the Cloud API Koji integration is
currently not used anywhere in production.
Switch to using `osbuild` job type with `koji` upload target for Koji
build jobs, instead of using `osbuild-koji` job type.
Modify unit tests accordingly.
Change the definition of `EnqueueOSBuildAsDependency()` function to
accept a slice of job IDs on which the OSBuild job depends. Previously,
only the manifest job ID was accepted as the only possible dependency.
This change will be needed in order to enqueue OSBuild jobs for Koji,
which depends on two jobs.
Move package set chain collation to the distro package and add
repositories to the package sets while returning the package sets from
their source, i.e., the ImageType.PackageSets() method.
This also removes the concept of "base repositories". There are no
longer repositories that are added implicitly to all package sets but
instead each package set needs to specify *all* the repositories it will
be depsolved against.
This paves the way for the requirement we have for building RHEL 7
images with a RHEL 8 build root. The build root package set has to be
depsolved against RHEL 8 repositories without any "base repos" included.
This is now possible since package sets and repositories are explicitly
associated from the start and there is no implicit global repository
set.
The change requires adding a list of PackageSet names to the core
rpmmd.RepoConfig. In the cloud API, repositories that are limited to
specific package sets already contain the correct package set names and
these are now copied to the internal RepoConfig when converting types in
genRepoConfig().
The user-specified repositories are only associated with the payload
package sets like before.
