Update the osbuild/images to the version which introduces "dot notation"
for distro release versions.
- Replace all uses of distroregistry by distrofactory.
- Delete local version of reporegistry and use the one from the
osbuild/images.
- Weldr: unify `createWeldrAPI()` and `createWeldrAPI2()` into a single
`createTestWeldrAPI()` function`.
- store/fixture: rework fixtures to allow overriding the host distro
name and host architecture name. A cleanup function to restore the
host distro and arch names is always part of the fixture struct.
- Delete `distro_mock` package, since it is no longer used.
- Bump the required version of osbuild to 98, because the OSCAP
customization is using the 'compress_results' stage option, which is
not available in older versions of osbuild.
Signed-off-by: Tomáš Hozza <thozza@redhat.com>
Remove all the internal package that are now in the
github.com/osbuild/images package and vendor it.
A new function in internal/blueprint/ converts from an osbuild-composer
blueprint to an images blueprint. This is necessary for keeping the
blueprint implementation in both packages. In the future, the images
package will change the blueprint (and most likely rename it) and it
will only be part of the osbuild-composer internals and interface. The
Convert() function will be responsible for converting the blueprint into
the new configuration object.
Update the internal RepoConfig object to
accept a slice of baseurls rather than a
single field. This change was needed to
align RepoConfig with the dnf spec [1].
Additionally, this change adds custom json
marshal and unmarshal functions to ensure
backwards compatibility with older workers.
Add json tags to the internal rpmmd config
since this is serialized in dnfjson.
Add unit tests to check the serialization
is okay.
[1] See dnf.config
All calls to rpmmd.Depsolve() are now replaced with the equivalent call
to solver.Depsolve() (or dnfjson.Depsolve() for one-off calls).
Attached an unconfigured dnfjson.BaseSolver to all APIs and server
configurations where rpmmd.RPMMD used to be. This BaseSolver instance
loads the repository credentials from the system and carries the cache
directory, much like the RPMMD field used to do. The BaseSolver is used
to create an initialised (configured) solver with the platform variables
(module platform ID, release ver, and arch) before running a Depsolve()
or FetchMetadata() using the NewWithConfig() method.
The FillDependencies() call in the modulesInfoHandler() of the weldr API
has been replaced by a direct call to the Depsolve() function. This
rpmmd function was only used here. Replacing the rpmmd.Depsolve() call
in rpmmd.FillDependencies() with dnfjson.Depsolve() would have created
an import cycle. The FillDependencies() function could have been moved
to dnfjson, but since it's only used in one place, moving the one-line
function body into the caller is ok.
For testing:
The mock-dnf-json is compiled to a temporary directory during test
initialisation and used for each Depsolve() or FetchMetadata() call.
The weldr API tests now use the mock dnfjson. Each rpmmd_mock.Fixture
now also has a dnfjson_mock.ResponseGenerator.
All API calls in the tests use the proper functions from dnfjson and
only the dnf-json script is mocked. Because of this, some of the
expected results in responses_test had to be changed to match correct
behaviour:
- The "builds" array of each package in the result of a module or
project list is now sorted by version number (ascending) because we
sort the package list in the result of dnfjson by NVR.
- 'check_gpg: true' is added to the expected response of the depsolve
test. The repository configs in the test weldr API specify 'CheckGPG:
True', but the mock responses returned it as false, so the expected
result didn't need to include it. Since now we're using the actual
dnfjson code to convert the mock response to the internal structure,
the repository settings are correctly used to set flag to true for
each package associated with that repository.
- The word "occurred" was mistyped as "occured" in rpmmd and is now
fixed in dnfjson.
Extend Weldr API to accept a list of denied image types, which should
not be exposed via API for any supported distribution. This
functionality will be needed to not expose image types which can't be
successfully built outside of Red Hat VPN. Example of such images are
the official RHEL EC2 images, which include RHUI client packages not
available publicly.
Image Types are filters when listing available compose types and
creating a new compose using Weldr API.
Extend osbuild-composer configuration to allow specifying the list of
denied Image Types for Weldr API.
Add unit tests for implemented changes.
Add NEWS entry describing the newly introduced functionality.
Signed-off-by: Tomas Hozza <thozza@redhat.com>
Modify composer to use RepoRegistry, instead of loading the host
repositories, when initializing WeldrAPI.
Modify WeldrAPI to use RepoRegistry, instead of a map of repository
definitions. Make sure that the RepoRegistry method specific to image
type is used in Welder where appropriate. Specifically when depsolving a
Blueprint, which is used to build a specific image type. Update Weldr
API unit tests to reflect the change.
Add a new method to RepoRegistry, allowing to get list of repositories,
which should be used for building an image for a given architecture,
without specifying the exact image type. Add relevant unit tests.
Signed-off-by: Tomas Hozza <thozza@redhat.com>
fedoratest was yet another dummy distribution used by unit tests. After
the rework of test_distro, there is no reason to not use it as the only
distro implementation for testing purposes.
Remove fedoratest distro and replace it with test_distro in all affected
tests.
Signed-off-by: Tomas Hozza <thozza@redhat.com>
testjobqueue did not implement the JobQueue interface correctly (noted
in its package comment), making it impossible to write tests for
JobQueue itself.
Replace its use everywhere with fsjobqueue operating on a temporary
directory.
This is how it is used in the rest of the code, as a name to represent
the repository in the weldr API. Rename to match its use, and avoid
confusion with the ID passed to dnf-json, which is not the same.
Signed-off-by: Tom Gundersen <teg@jklm.no>
The `jobs/:job_id/builds/:build_id/image` route was awkward: the
`:jobid` was actually weldr's compose id and `:build_id` was always `0`.
Change it to `jobs/:job_id/artifacts/:name`, where `:job_id` is now a
job id, and `:name` is the name of the artifact to upload. In the
future, it could support uploading more than one artifact.
This allows removing outputs from `store`, which is now back to being a
pure JSON-store. Take care that `weldr` returns (and deletes) images
from the new (or for backwards compatibility, the old) location.
The `org.osbuild.local` target continues to exist as a marker for the
worker to know whether it should upload artifacts.
A timeout doesn't make sense on this level, because it is very difficult
to estimate how long downloading rpm metadata takes. Drop it completely
in favor of higher-level timeouts in the test runner.
Fixes#601
The store is responsible for two things: user state and the compose queue. This
is problematic, because the rcm API has slightly different semantics from weldr
and only used the queue part of the store. Also, the store is simply too
complex.
This commit splits the queue part out, using the new jobqueue package in both
the weldr and the rcm package. The queue is saved to a new directory `queue/`.
The weldr package now also has access to a worker server to enqueue and list
jobs. Its store continues to track composes, but the `QueueStatus` for each
compose (and image build) is deprecated. The field in `ImageBuild` is kept for
backwards compatibility for composes which finished before this change, but a
lot of code dealing with it in package compose is dropped.
store.PushCompose() is degraded to storing a new compose. It should probably be
renamed in the future. store.PopJob() is removed.
Job ids are now independent of compose ids. Because of that, the local
target gains ComposeId and ImageBuildId fields, because a worker cannot
infer those from a job anymore. This also necessitates a change in the
worker API: the job routes are changed to expect that instead of a
(compose id, image build id) pair. The route that accepts built images
keeps that pair, because it reports the image back to weldr.
worker.Server() now interacts with a job queue instead of the store. It gains
public functions that allow enqueuing an osbuild job and getting its status,
because only it knows about the specific argument and result types in the job
queue (OSBuildJob and OSBuildJobResult). One oddity remains: it needs to report
an uploaded image to weldr. Do this with a function that's passed in for now,
so that the dependency to the store can be dropped completely.
The rcm API drops its dependencies to package blueprint and store, because it
too interacts only with the worker server now.
Fixes#342
os.Exit() doesn't execute defer-ed functions, OTOH we call panic()
in case of setup errors, which does run defer-ed functions. So move
the actual test setup and execution in a separate function which will
execute all defer-ed functions and return the exit code from the
test suite to TestMain.
The mock server used by unit tests is slightly different than the
running server, mostly related to package names that are hard-coded.
This adds a bool to testState that can be used in the tests to alter the
expected behavior. It should be used as little as possible.
Copy weldrcheck's utils.go into client, switch to using TestState struct
to hold global test data. Only build unit_test.go if integration has not
been selected.
This is in preparation to moving weldrcheck code into client *_test.go
files so that the test code can be shared and run against a mock server
during unit testing, or against a running WELDR API server during
integration testing.
