Commit b1c5ef2a introduced support for retrieving logs from osbuild.
This commit finishes the second part - actually returning the logs
from /compose/logs route.
dnf-json relies on dnf's ability to cache repository metadata. This is
important, because the API calls it quite often to serve requests for
package lists and depsolves.
However, osbuild's dnf stage always fetches new metadata, because it
doesn't have access to the host's cache. Since metadata is valid for
some time, even after a repository changed, the checksum we put in
the pipeline might be old.
Force a new metadata download when producing the pipeline. This is still
not perfect, but greatly reduces the probability of putting stale
metadata into the pipeline.
Allow bootloader specific packages to be defined per architecture,
and allow repositories to depend on the architecture.
This does not altert he pipelines we produce, part from the ami
image now contains the grub2-pc package, rather than the grub2
package. This should make no difference.
Signed-off-by: Tom Gundersen <teg@jklm.no>
The pipeline generation now takes the architecture as an argument.
Currently only x86_64 is supported. The architecture is detected
at start-up, and passed down to each pipeline translation.
For osbuild-pipeline we now requrie the architecture to be passed
in.
Signed-off-by: Tom Gundersen <teg@jklm.no>
Instead of having a static repository checksum, set it dynamically from
the metadata that osbuild-composer last saw. This is implemented in
dnf-json, which returns the checksums for each repository on every call.
This enables the use of repositories that change over time, such as
fedora-updates. Note that the osbuild pipeline will break when such a
repository changes. This is intentional: pipelines have to be
reproducible.
The implementation is just a stub returning always the same tar archive.
The ability to return actual logs will be implemented in the future - osbuild
isn't currently returning any logs.
Prior to this commit blueprint getters looked like C-style API with output
parameters. This commit refactors them to more conventional multiple return
values API.
As a part of f4991cb1 ComposeEntry struct was removed from store package.
This change made sense because this struct is connected more with API than
with store - store uses its own Compose struct. In addition, converters
between Compose and ComposeEntry were added. Unfortunately, ComposeEntry
contains ImageSize which was not stored in Compose but retrieved from store
using GetImage method. This made those converters dependent on the store,
which was messy.
To solve this issue this commit adds image struct into Compose struct.
The content of image struct is generated on the worker side - when the worker
sets the compose status to FINISHED, it also sends Image struct with detailed
information about the result.
This commit introduces basic support for upload API. Currently, all the routes
required by cockpit-composer are supported (except for /compose/log).
Also, ComposeEntry struct is moved outside of the store package. I decided
to do it because it isn't connected in any way to store, it's more connected
to API. Due to this move there's currently a known bug that image size is
not returned. This should be solved by moving Image struct inside Compose
struct by follow-up PR.
Make osbuild-composer use FromHost() directly. Everywhere else needs to
specify the distro explicitly.
Also don't panic when a distro doesn't exist. Instead, return nil. Make
sure all callers check for that.
Automatically registering on `init()` is clever, but a bit too magical
and easy to get wrong, because every binary must include all distros
somewhere.
Flip this inside out: distros now have a `New()`, which returns
something that implements the `Distro` interface. The distro package
explicitly creates all of them.
This means that distros cannot import distro itself anymore, because go
forbids import cycles. This only affected `InvalidOutputFormatError`.
Return a generic error for now.
lorax-composer recently introduced API version 1. This commit introduces
very basic support for it. This implementation tries to deduplicate code
for routes with the same behaviour as much as possible. All the differences of
v1 API are marked as TODOs for now and will be implemented in follow-ups PRs.
Make distros export repository information and use those in the weldr
API. This means that repos are only specified once and that the API
returns the right packages when we allow different distros.
Split the error case (no sources specified) into its own function, so
that we can use `source/info/:sources` (note the colon) to get the list
of sources without the leading `/`. This gets rid of two special cases
which made the previous implementation hard to parse.
The naming is confusing: repositories have an `id` and a human readable
`name`. Weldr's sources also have a field called `name`, but
lorax-composer uses that as a way to identify repositories by their id.
Use `id` consistently here as well.
The blueprint freeze route returns the blueprint info but each
package will be the package selected by depsolving. So, instead of the
version being the version number with optional wildcards as
/blueprints/info would provide, the version is of the form
`Version-Release.Arch`.
These endpoint are similar in many ways, therefore just one commit. Their
functionality is basically same as in lorax except for error messages and
weird edge cases when handling trailing slashes.
closes#64, closes#65
Add a route to set a blueprint back to its state at a particular change.
The route `blueprints/undo/:blueprint/:commit` requires the blueprint
name and the commit hash for the change that the blueprint should be
reverted too. Also, the commit message for the change created when a
blueprint is pushed is now passed from the api to the store's
PushBlueprint funtion.
The package list is generated on each request for a package so there is
no longer a need to generate the package list in main or to store these
packages in the API object.
The package list is now generated from the base repo and the
user-defined repos. This allows users to add packages not found in the
base repo to their blueprints.
We want to test API methods which calls dnf. Unfortunately, calling dnf
is expensive operation - it requires network access and downloading
a lot of (meta)data. This commit changes the rpmmd implementation
so that it can be mocked.
For each blueprint name passed to the route, a list of the changes to
that blueprint will be returned.
weldr/tests: add blueprint changes test
In order to test blueprint changes a blueprint must be created with a
unique id. Blueprint changes are not deleted when the blueprint is
deleted so in order to test this against lorax the blueprint must have
not been used/tested before. This id is created from a random int. The
test creates and deletes the same blueprint twice to check that each
creation updates the list of changes.
The delete source handler now removes the leading "/" from the
parameters passed to it. Not removing the "/" caused sources to not
be deleted from the store since they could not be found when their name
contained a "/" as the first character.
lorax-composer uses the host's repositories for building images. This is
prone to accidental configuration errors and duplicates functionality
(adding custom repositories via the source API is much more explicit).
However, blueprints don't specify the distribution they're based on.
This is something they should do in the future to enable cross-distro
image builds. Until then, read `/etc/os-release` to detect the host OS
and use that as the base distro for a blueprint.
Detection works by concatenating the ID field with a `-` and the
VERSION_ID field. This mandates how additional distributions should
register themselves to the `distro` package.
If composer cannot build the detected distro, fall back to fedora-30.
Use this detection everywhere that fedora-30 was hard-coded before.
Introduce the `distro` package, which contains an interface for OS
implementations. Its main purpose is to convert a blueprint to a
distro-specific pipeline.
Also introduce the `distro/fedora30` package. It is the first
implementation of the distro interface. Most of its code has been copied
with minimal modifications from the blueprint package.
The `blueprint` package is now back to serving a single purpose:
representing a weldr blueprint. It does not depend on the `pipeline`
package anymore.
Change osbuild-composer and osbuild-pipeline to use the new API,
hard-coding "fedora-30". This looks a bit weird now, but is the same
behavior as before.
All test cases now also take an "distro" key in the "compose" object.
The api now supports user defined sources alongside the existing base
repository. The routes /projects/source/new and
/projects/source/delete/<name> have been added.
/projects/source/info/<names> and /projects/source/list have been
updated.
The SourceConfig type is now called from the store instead of being
declared in the api.
Make each command accept a `repos` key containing repository
descriptions.
Make weldr API pass the repository like this. Nothing should change,
because the repos were the same (Fedora 30).
There was missing condition for the case when compose push fails.
As the previous commit introduces customizations which can return even more
errors it is important to report such errors.
For now the API is returning only 500 HTTP code. In future we should
distinguish between failures and blueprint validation errors.
All composes now include the image size in their status response. The
image size will be 0 except for finished composes where it will be the
file length in bytes.
In order to maintain parity with lorax the api needs to reply with an
error message equivalent to that used by lorax. Error messages are now
returned inside an error object that contains an id, message, and
optional status code.
For some routes, there are errors when no url parameters are passed. The
httprouter was using named parameters of the form /:param which does not
match for empty parameters. Now, it has been updated to use the
catch-all parameters of the form /*param. This change allows the case of
no parameters. However, parameters will now include a "/" as
their first character. This needs to be removed from the string in the
route handler.
In order to provide the proper error message for
/modules/list/<modules>, searching for the modules needed to be updated.
The requested modules and known packages are iterated over and if there
is a match the module is added to the response. Also, the found module
is dropped from the list of requested modules. If this list is not empty
after searching all of the modules then an error is returned containing
the name of the non-existant module.
