Move the handling of the list of enabled and disabled systemd services
more to the end of the `os` pipeline, just before the SELinux stage.
This has no functional effect on produced images, but it will make it
nicer once the handling of the custom files and directories will be
added to the pipeline. Specifically it should be added right before the
services stage to allow enabling custom service files, but after all
other configurations that are applied to the image.
Regenerate all manifests.
Signed-off-by: Tomáš Hozza <thozza@redhat.com>
Changes:
- Removed unneeded RPMs from the build root.
- /usr/bin/tar removed from selinux stage: only added on-demand when tar
is installed and used in a pipeline.
- s390x kernel options: debug added when specified in customizations.
Previously, kernel customizations were ignored for s390x.
Converted by loading them through the manifest parser in osbuild and
formatting them through v2 before dumping.
These are not the "real" manifests that osbuild-composer would generate,
but they will make it a tiny bit easier to compare and detect changes in
the distro definition when it's moved to the common rhel8 package.
When `image-info` inspects ostree images, the `/usr/etc` is bind-mounted
to `/etc`. This results in conflicting SELinux policy specification for
these files and makes the outcome dependent on the `setfiles` build.
All the files in `/etc` have mismatch in the expected vs. actual SELinux
context.
Exclude `/etc` from the check of SELinux ctx mismatches in case the
analysed tree is from an ostree-based image.
Sort the list returned `read_selinux_ctx_mismatch()` based on the item's
`filename` key, to make the result consistent across runs.
`image-info` can not read SELinux labels from the images, which are not
known to the host. This makes the report content depend on the host
environment. As a temporary workaround, relabel the image-info script with
osbuild_exec_t label to allow it to read unknown SELinux labels.
Modify documentation in `test/README.md` to explain the issue with
`image-info` and unknown SELinux labels.
Modify the `generate-all-test-cases` to relabel `image-info` before
generating test cases.
Modify the `image_tests.sh` to relabel `image-info` before running image
test cases.
Add 'tar' image for 'rhel-8' on 's390x' back to the matrix of generated
test cases, as it was removed by mistake. Regenerate the image test
case. Remove 'tar' image from 'rhel-84' on 's390x' from the matrix of
generated test cases, as it is not supported.
Regenerate all affected image test cases.
Signed-off-by: Tomas Hozza <thozza@redhat.com>
This is a preparation for defining EC2 images for RHEL-8.5.0. These
extensions to image-info tool represent modifications done to the
official EC2 images currently produced as RHEL release. It is important
to be able to analyse these aspects of images, before we define them in
osbuild-composer, to ensure that the resulting images will be consistent
with the current state.
- Read non-empty lines from /etc/hosts file and add them to the report.
- Read content of /etc/machine-id and add it to the report.
- Read uncommented key/values from /etc/systemd/logind.conf and add them
to the report.
- Read all ifcfg-* files from /etc/sysconfig/network-scripts/ and add
their values to the report.
- Read content of /etc/locale.conf and add it to the report.
- Read SELinux configuration from /etc/selinux/config and add it to the
report.
- Inspect the filesystem tree for SELinux context mismatches and add
them to the report.
- Read configuration files from /etc/modprobe.d/ and for now report only
all blacklisted kernel modules.
- Read RHSM configuration from /etc/rhsm/rhsm.conf and add it to the
report.
- Read cloud-init configuration from /etc/cloud/cloud.conf and add it to
the report.
- Read all *.conf files from /etc/dracut.conf.d/ and add their content to
the report.
- Read VC and X11 keyboard configuration and add it to the report.
- Read specific configuration directives from Chrony configuration and
add them to the report. Specifically 'server', 'pool', 'peer' and
'leapsectz'.
- Read drop-in configurations for *.service unit files from
/etc/systemd/system/ and add them to the report.
- Read all configuration files from /etc/tmpfiles.d/ and add them to the
report.
- Read all configuration files from /etc/sysctl.d/ and add them to the
report.
- Read the Tuned active profile and profile mode and add them to the
report.
- Read all configuration files from /etc/security/limits.d and add them
to the report.
- Read sudoers configuration from /etc/sudoers and files in
/etc/sudoers.d/ and add uncommented lines to the report. No
sophisticated parsing is done, because the configuration format
grammar is too complicated for the purpose of image-info.
- Read udev rules configuration files from /etc/udev/rules.d/ and add
them to the report.
- Read DNF configuration and defined vars and add them to the report.
- Read profile ID and enabled features used by authselect.
- Enable SELinux, extended attributes and POSIX ACLs support when
unpacking 'tar' image type to prevent potential mismatches
Regenerate all image test cases to reflect changes in the image-info
output. Modify the distro-arch-imagetype-map.json to cover all
combinations currently covered by existing image test cases.
Add doc strings to all read_* functions.
Signed-off-by: Tomas Hozza <thozza@redhat.com>
By default, `qemu-img convert` creates qcow2 images usable in qemu 1.1 and
newer. RHEL 8 guest images are meant to be bootable on RHEL 6 though.
Unfortunately, RHEL 6 has qemu 0.12, therefore these images cannot be used
there.
To fix this, we need to use the new qcow2_compat option in qemu assembler
to override the default compat version and make qcow2 images that can be used
in qemu 0.10 and newer.
For this, we need osbuild 28 that isn't yet available in of any of
downstreams, therefore we need to pin it everywhere.
Signed-off-by: Ondřej Budai <ondrej@budai.cz>
Change the "image-format" from a string to a dict, with a "type":
$value entry, where $value contains the previous plain string
data.
Additionally, include the qcow2 format version, if the given
image is indeed a qcow2.
Adapt all manifest test accordingly (partly done by Ondřej)
Python 3 script used for conversion of manifest tests:
import os
import json
for name in os.listdir(os.getcwd()):
if not name.endswith(".json"):
continue
print(name)
with open(name, "r") as old:
data = json.load(old)
info = data.get("image-info", {})
format = info.get("image-format")
if not format:
continue
info["image-format"] = {
"type": format
}
if format != "qcow2":
continue
info["image-format"]["compat"] = "1.1"
with open(name + ".new", "w") as new:
json.dump(data, new, indent=2)
new.write("\n")
new.flush()
os.rename(name+".new", name)
test: use the new image-info format in all test manifests
The previous commit converted only qcow2 and openstack manifests but this change
is actually needed for all manifests produced by the qemu assembler.
Co-Developed-by: Ondřej Budai <ondrej@budai.cz>
Use en_US.UTF-8 as default for LANG, which is what previously was
used and is also needed to properly work on non-us/latin setups[1].
In the customization tests, use a different value than the default
one to check that the customization does in fact work.
[1] http://git.app.eng.bos.redhat.com/git/spin-kickstarts.git/tree/rhel8/rhel-8.2-kvm-x86_64.ks#n4
Co-authored-by: Achilleas Koutsou <achilleas@koutsou.net>
We have integration tests that boot most of the image types, let
the image tests focus on the actual content of the images, shaving
off considerable CI time.
The only missing one is OpenStack (which should be ported over) and
tar (which we need to define the integration test for).
Signed-off-by: Tom Gundersen <teg@jklm.no>
Add RHEL-8.4 image test case manifests for all architectures. The set of
image types per architecture is based on what is currently available for
RHEL-8.3.
The image test case for RHEL-8.4 tar image on s390x is not added yet
because of Issue #1220.
Fixes#1167
Signed-off-by: Tomas Hozza <thozza@redhat.com>
