This is to test the functionality of the new `saved_entry` grub2
config file. Ideally an integration test would install a new non-
default kernel and check that it does not get selected. Something
for the future.
In addition to the required base layer, provided via the the input
of the same name, the oci-archive stage now accepts up to nine
additional layers that get added on top of each other, sorted in
ascending order, i.e. `layer.1` to `layer.9`.
Adapt the `fedora-ostree-container` example manifest so that the
ostree commit is now in a separate layer, which makes it possible
to share the base layer between different commits container.
Add a new basic test for the dracut stage. It uses a osbuild
pipeline to build an initrd and inspects it via the initrd.py
module. The content is compared to a reference located in the
same directory as the pipeline (test/data/stages/dracut/).
Change the test manifests that use containers to not include
docs when installing. Also don't install docs in the build root
for those manifests. Since the fedora-ostree-container.mpp is
being built in CI, this also tests that the new option.
The `org.osbuild.files` source provides files, but might in the
future not be the only one that does. Therefore rename it to
match the internal tool that is being used to fetch the files.
This is done for most other osbuild modules that target tools.
The format v1 loader is adapted to make this change transparent
for users of the v1 format, so we are backwards compatible.
Change the MPP depsolve preprocessor so that for format v2 based
manifest `org.osbuild.curl` source is used. Also rename the
corresponding source test. Adapt the format v2 mod test to use
the curl source.
Add a v2 manifest to builds an ostree commit, then builds a small
container with a webserver and puts that commit into it.
Start a new test suit where this manifest is built and then checked
that the artifact exists. In the future the artifact should also be
inspected and run by a container engine and the commit be pulled
via ostree.
Add an example that builds a small container, based on the minimal
container fedora kickstart (see [1, 2]). There is a deviation
because osbuild currently does not support removing
random files like it is done in [2].
The build pipeline "build" in f32-build-v2.json) is a port of the
existing build pipeline in f32-build.json.
This manifest is currently not used in any automated tests (yet),
but is there as a showcase for the new format. It does however
test the format version 2 support for mpp, since that is called
in CI.
[1] https://pagure.io/fedora-kickstarts/blob/main/f/fedora-container-common.ks
[2] https://pagure.io/fedora-kickstarts/blob/main/f/fedora-container-base-minimal.ks
The stage was structured in a way so that it supports many different
inputs, like, `archive` and in the future maybe trees, git checkouts.
This does not fit very well into the new input model, where instead
seperate `copy.tree` and `copy.files` stages might make more sense.
Since the stage is not been used anywhere, and mainly got added
as a way to get the ignition dracut module via an archive of a git
repo, remove the stage for now. A replacement will be brought back
in the future.
The sysconfig directory contains a variety of system configuration files. The
values found in each of the configuration files may need to be specified
before first boot.
Currently, only the kernel and network configs can be modified and will
override existing files.
Add the python3-iniparse package to f32-build.mpp.json, which is a dependency
of the new 'org.osbuild.rhsm' stage. This is needed in order to be able to
test the 'org.osbuild.rhsm' stage.
Regenerate affected manifests in test/data/manifest using 'make --always-make
test-data'.
Signed-off-by: Tomas Hozza <thozza@redhat.com>
Also, upgrade the test to fedora-32 from https://osbuild.org/rpmrepo.
Changed a.json to not include a zipl stage with empty options. This
breaks the test, because the osbuild run of b.json is relying on a
checkpoint of the result of a.json. If that's not present, the rpm
database (and other generated files) are marked as differing, because
the whole pipeline is generated again. This might have worked before,
because the previous package list happened to be deterministic.
Also, upgrade the test to fedora-32 from https://osbuild.org/rpmrepo.
Changed a.json to not include a kernel-cmdline stage with empty options.
This breaks the test, because the osbuild run of b.json is relying on a
checkpoint of the result of a.json. If that's not present, the rpm
database (and other generated files) are marked as differing, because
the whole pipeline is generated again. This might have worked before,
because the previous package list happened to be deterministic.
This simplifies the `test-data` rules in `Makefile` considerably. Also,
it allows adding `*.mpp.json` files in other directories without needing
to copy rules. (make's pattern-based rules only allow a single `%`).
Adjust test/data/README.md accordingly.
Add a new helper script to check if a mount / file-system was
mounted with specific flags. Currently only "ro", "nosuid",
"nodev" and "noexec" flags are supported. This script is in
test/data since it will be used from other tests and is itself
not a test per se.
#471 extends the assembler test suite to also test xfs and btrfs filesystems
in raw and qemu assemblers. However, this change leads to long running times
of this suite.
The running time of these test consist of 3 main steps:
1) Building the build pipeline
2) Building the stages
3) Running the assembler
There are two optimization approaches:
1) Caching
OSBuild supports caching, therefore it's possible to cache results of first
two steps.
2) Minimizing the operating system tree
Assemblers don't care about the image contents. Therefore, it's possible
to create just a small tree which would be used to test the assemblers.
This should lead to speed up in the step 2 (smaller tree should be built
quicker) and in step 3 (big part of assembling is just copying files over
to the image).
This commit implements the second approach. A new test manifest is now added,
which just installs the filesystem package and its dependencies and this tree
is then labeled. This solution was chosen, so that the assemblers get
something that looks as a proper filesystem tree but also can be built pretty
quickly.
Before this change, the test_rawfs method with #471 merged ran for 842 seconds.
After this change, it ran for 391 seconds.
Add the ability to mask services, which is done e.g. when building
installers. See systemctl(1) for more information about masked
services.
Modify the existing stage test to include a test for it.
Add a simple check for the selinux check by building the f32-base
image with an added selinux stage. Use the options from a test
json file and verify the labels against a set of labels given in
the aforementioned test file.
Install rpm-ostree in the (mpp-)f32-build.json build manifest, so
ostree commits can be created using the same build root. Update
all affected manifests.
This replaces the round-robin mirror at fedoraproject.org, as that was
proving to be quite unreliable.
This is a short-term fix before add metalink support.
Signed-off-by: Tom Gundersen <teg@jklm.no>
Move the stage-tests over to the new test-infrastructure. This moves
the test invocation into `./test/run/test_stages.py`, so it is invoked
as part of the runtime-tests. Secondly, the test-data is stored in
./test/data/stages/ so the path is relative to
TestBase.locate_test_data().
While at it, this also drops the dynamic class modifications and instead
uses subTest(). This simplifies the code quite a bit and avoids
dynamically creating python code.
This moves the `sources_tests` into ./test/data/sources/ and makes the
entire test use `locate_test_data()` to get relative paths for their
accesses.
This further improves our test cases to support running from
installments rather than local checkouts. We need access to ./test/data
guarded, so we can install packages and still have the tests access the
correct paths.
This also adjusts the HTTP-Server we use in the test to serve data
relative to a path it is handed. I now chose `./test/data`, which will
easily allow us to re-use the same HTTP-Server in the future for other
tests that require it.
This adds F32 manifests in ./test/data/. To avoid magically deducing the
package list out of the void, this adds a ManifestPreProcessor (MPP)
called `./tools/mpp-depsolve.py`. What this does is it takes a manifest
on stdin, modifies it, and produces a manifest on stdout.
The `mpp-depsolve.py` preprocessor takes a manifest and modifies all the
`org.osbuild.rpm` stages. It parses a new option to that stage called
`mpp-depsolve`, which contains a package-list, a repo-list, and dnf
metadata. It then drops this `mpp-depsolve` option (since it would be an
invalid manifest otherwise), depsolves the packages, inserts a proper
"packages" option as well as appends the correct paths to the sources
entry.
With this in place, this adds `mpp-f32-base.json` and
`mpp-f32-build.json` in ./test/data/manifests/. These will then be used
as base F32 manifests for our test-suite.
Lastly, this adds `./test/data/README.md` as a place to document the
files we place in `./test/data/`, since most of the files do not allow
for comments.
Use the new `locate_test_data()` helper to get access to test-data.
Guard the test with `have_test_data()` to skip it in case test-data
access is not available.
