Small changes to the schema so it better aligns with the need of the
stage:
move the efi properties to the top-level
kernel information is under `kernel` object
kernel command line options is an array now
Change `linuxefi` to `linux` which should work on RHEL 8 and is the
only thing that works on arm64.
Small PEP-8 fixes.
Signed-off-by: Antonio Murdaca <runcom@linux.com>
Add experimental support for writing the fstab file to `/etc` in on
OSTree deployment. Experimental here means that options might be
replaced in the near future with a different mechanism and are thus
not considered stable API.
Add a new `org.osbuild.authselect` stage for configuring system identity
and authentication sources using `authselect`. The stage runs
`authselect select` command from the image in a chroot to set the
desired 'profile_id' profile. Optionally, a list of specific profile
features to enable can be passed using the 'features' option.
Add a test case for the new stage.
Signed-off-by: Tomas Hozza <thozza@redhat.com>
Add a new option 'x11-keymap' for configuring the X11 keyboard settings.
The value of the option is a dictionary with keys representing settings
which can be configured. Currently, only the 'layouts' setting can be
configured. Its value is a list of strings, representing the specific
layouts, which should be configured for the X11 keyboard.
Update the stage test case with the new option 'x11-keymap'.
Signed-off-by: Tomas Hozza <thozza@redhat.com>
The `org.osbuild.chrony` stage currently supports only a single option
'timeservers' which does not allow specifying additional options for the
configured timeservers. The option can not be easily extended to allow
specifying additional options and at the same time keep the backward
compatibility with old manifests.
The need for a lower-level stage option allowing to configure additional
options of the 'server' directive is required by RHEL AMI images, which
use 'maxpoll', 'minpoll' and 'prefered' options.
Extend the `org.osbuild.chrony` stage with two additional options. The
'servers' option accepts a list of dictionaries specifying timeservers
to be configured using the 'server' directive, including a subset of the
directive options. The 'servers' option can not be used at the same time
in the stage options as the 'timeservers' option.
The second added option is 'leapsectz' corresponding with a directive of
the same name. The value of the option is a string. If the provided
string is empty, then all occurrences of the 'leapsectz' directive are
removed from the `chrony.conf`. Otherwise, the 'leapsectz' directive is
added to the `chrony.conf` with the provided value, while all original
occurrences of the option are removed.
Add a new stage test case under `test/data/stages/chrony-servers` to
test the new variant of the stage options. The reason is that the
'timeservers' option conflicts with 'servers' option, which makes it
impossible to test both of them in the same test case.
Signed-off-by: Tomas Hozza <thozza@redhat.com>
Add new `org.osbuild.cloud-init` stage, which currently allows to create
configuration files for cloud-init under `/etc/cloud/cloud.cfg.d`. The
stage supports only a very limited subset of cloud-init configuration
options, which is covering needs of RHEL AMI images.
The schema mandates that if the 'configuration_files' option is
specified, then at least one configuration file must be defined. In
addition each section of the configuration must contain at least one
property (section or configuration option).
Add `python3-pyyaml` package to the `F34-build` testing manifest,
because it is required for running and testing the new stage.
Regenerate all affected manifests.
Add test for the new stage.
Update the `osbuild-ci` container image used for testing to a new tag,
which includes python3-pyyaml, the dependency of the new stage.
Signed-off-by: Tomas Hozza <thozza@redhat.com>
Add new `org.osbuild.dracut.conf` stage. The option
'configuration_files' allows to create dracut configuration files under
`/usr/lib/dracut/dracut.conf.d` and thus make the
configuration persistent. The stage supports only a subset of all
configuration options allowed in dracut configuration. The intention is
to provide almost functional parity with the options supported by
`org.osbuild.dracut` stage.
The schema mandates that at least one configuration file must be defined
in the stage options. In addition, each configuration file must contain
at least one configuration option.
Add test for the new stage.
Signed-off-by: Tomas Hozza <thozza@redhat.com>
Use the `--no-tell-kernel` option to avoid invoking the `ioctl` call to
tell the kernel to reload the partition table. Since we are not using
the kernel to access the partitions this introduces unnecessary i/o and
might also lead to spurious warnings when a partition without dos label
is written, like:
Re-reading the partition table failed.: Invalid argument
Instead of operating directly on a file, which was previously specified
by `filename`, operate on a device. This is more flexible since a file
can be accessed via a loop back device; but the inverse is obviously
not true, like other devices can not be accessed via a plain file.
Therefore, re-factor the stage to use a device and adapt the existing
test (`fedora-ostree-image`).
This was left over from the old qemu assembler and is not really
needed anymore. Also removes some defaults that are not valid
according to the new schema of the stage.
Add new stage `org.osbuild.systemd-logind` allowing to create
systemd-logind configuration drop-ins in `/usr/lib/systemd/logind.conf.d`.
Currently only the `NAutoVTs` option in the `Login` section can be
configured.
The schema mandates that:
- There must be at least one configuration file defined.
- The 'Login' section is required, as it is the only one in the
systemd-logind configuration.
- At least one option must be configured in the 'Login' section.
Add test for the new stage.
Signed-off-by: Tomas Hozza <thozza@redhat.com>
Add new stage `org.osbuild.modprobe` allowing to create modprobe
configuration files in `/usr/lib/modprobe.d`. Currently only the
`blacklist` command can be used in the configuration files.
The schema mandates, that at least one configuration file must be
defined.
Add test for the new stage.
Signed-off-by: Tomas Hozza <thozza@redhat.com>
The `OSBUILD_QEMU_IMG_COROUTINES` was introduced to allow specifying
the number of coroutines used in `qemu-img convert` by the runner,
or osbuild directly. This can be useful in various scenarios, but
is specifically used by the rhel 8.2+ runner to limit the number of
coroutines used for Aarch64 to one, since a bug in `qemu-img` leads
to random hangs on that platform.
Extend the `org.osbuild.sysconfig` stage to create `ifcfg-*` files
under `network-scripts` subdirectory. It is possible to set only values
currently set in RHEL AMI images, specifically:
- BOOTPROTO
- DEVICE
- IPV6INIT
- ONBOOT
- PEERDNS
- TYPE
- USERCTL
Change all `configure_*` functions to raise ValueError exception,
instead of returning values. As a follow up change, remove all checks of
the returned value from these functions.
Update the `org.osbuild.sysconfig` stage test case to create ifcfg
configuration files for two interfaces.
Signed-off-by: Tomas Hozza <thozza@redhat.com>
Extend the `org.osbuild.systemd` stage to create drop-in configuration
files for Systemd `.service` units under `/usr/lib/systemd/system`.
Currently only the `Environment` option in the `Service` section can be
configured.
Update the `org.osbuild.systemd` stage test case to create drop-in
configuration `10-rh-enable-for-ec2.conf` for `nm-cloud-setup.service`
unit, as used in RHEL AMI images.
Signed-off-by: Tomas Hozza <thozza@redhat.com>
Extend the `org.osbuild.rhsm` stage to configure selected options in the
subscription-manager configuration (in `/etc/rhsm/rhsm.conf`). It is
possible to set only values currently set in RHEL AMI images,
specifically:
- `manage_repos` option in `rhsm` section
- `auto_registration` option in `rhsmcertd` section
Ensure that the stage does not "touch" any configuration files, unless
it actually changes them. This prevents changing the file modification
time.
Update the `org.osbuild.rhsm` stage test case to set the additional
configuration options.
Signed-off-by: Tomas Hozza <thozza@redhat.com>
Use `patternProperties` instead of `propertyNames` and `pattern`,
which is not in draft 4 and so did not work (but also did not
throw an error).
Co-Developed-by: Achilleas Koutsou <achilleas@koutsou.net>
The stage was converted to use inputs, but its schema was not, which
means that although the stage requires inputs, they could not be
specified. Doh. Change the expected input to `commit`.
NB: This stage should be broken up, so *SHOULD NOT* be used in newly
created pipelines.
Fix a small whitespace change as well.
Based on that part of the qemu assembler that converts the raw image
into different virtualization formats, like qcow2 and such. Supports
all the formats the old qemu assembler also supported.
The `org.osbuild.files` input provides individual files to a stage.
Change the `refs` key in the returned dict to `files` to better
reflect that fact. Also adapt the documentation to indicate that
the keys actually paths and not necessarily checksums. This prepares
for future extension of the `files` input to pipeline origins.
This stage is the part of the qemu assembler that generates and
installs the grub2 core image on non-uefi or hybrid systems,
like x86 legacy and PPC64LE (Open Firmware).
This sage can be used to copy items, such as files or trees, from one
location to another. The only supported location for reading currently
is currently `input`. Supported locations for writing are `mount` and
`tree`.
