diff --git a/modules/bling/50-laptop.conf b/modules/bling/50-laptop.conf deleted file mode 100644 index 382609c..0000000 --- a/modules/bling/50-laptop.conf +++ /dev/null @@ -1,136 +0,0 @@ -# ------------------------------------------------------------------------------ -# /etc/tlp.conf - TLP user configuration (version 1.4) -# See full explanation: https://linrunner.de/tlp/settings -# -# Settings are read in the following order: -# -# 1. Intrinsic defaults -# 2. /etc/tlp.d/*.conf - Drop-in customization snippets -# 3. /etc/tlp.conf - User configuration (this file) -# -# Notes: -# - In case of identical parameters, the last occurence has precedence -# - This also means, parameters enabled here will override anything else -# - However you may append values to a parameter already defined as intrinsic -# default or in a previously read file: use PARAMETER+="add values" -# - IMPORTANT: all parameters here are disabled; remove the leading '#' if you -# like to enable a feature without default or have a value different from the -# default -# - Default *: intrinsic default that is effective when the parameter is missing -# or disabled by a leading '#'; use PARAM="" to disable an intrinsic default -# - Default : do nothing or use kernel/hardware defaults -# - -# ------------------------------------------------------------------------------ -# tlp - Parameters for power saving -# -# Settings based on Framework's guidance: https://knowledgebase.frame.work/en_us/optimizing-fedora-battery-life-r1baXZh - -# Select a CPU frequency scaling governor. -# Intel processor with intel_pstate driver: -# performance, powersave(*). -# Intel processor with intel_cpufreq driver (aka intel_pstate passive mode): -# conservative, ondemand, userspace, powersave, performance, schedutil(*). -# Intel and other processor brands with acpi-cpufreq driver: -# conservative, ondemand(*), userspace, powersave, performance, schedutil(*). -# Use tlp-stat -p to show the active driver and available governors. -# Important: -# Governors marked (*) above are power efficient for *almost all* workloads -# and therefore kernel and most distributions have chosen them as defaults. -# You should have done your research about advantages/disadvantages *before* -# changing the governor. -# Default: - -CPU_SCALING_GOVERNOR_ON_AC=performance -CPU_SCALING_GOVERNOR_ON_BAT=powersave - -# Set Intel CPU energy/performance policies HWP.EPP and EPB: -# performance, balance_performance, default, balance_power, power. -# Values are given in order of increasing power saving. -# Notes: -# - HWP.EPP: requires kernel 4.10, intel_pstate scaling driver and Intel Core i -# 6th gen. or newer CPU -# - EPB: requires kernel 5.2 or module msr and x86_energy_perf_policy from -# linux-tools, intel_pstate or intel_cpufreq scaling driver and Intel Core i -# 2nd gen. or newer CPU -# - When HWP.EPP is available, EPB is not set -# Default: balance_performance (AC), balance_power (BAT) - -CPU_ENERGY_PERF_POLICY_ON_AC=performance -CPU_ENERGY_PERF_POLICY_ON_BAT=power - -# Set Intel CPU P-state performance: 0..100 (%). -# Limit the max/min P-state to control the power dissipation of the CPU. -# Values are stated as a percentage of the available performance. -# Requires intel_pstate or intel_cpufreq driver and Intel Core i 2nd gen. or -# newer CPU. -# Default: - -CPU_MIN_PERF_ON_AC=0 -CPU_MAX_PERF_ON_AC=100 -CPU_MIN_PERF_ON_BAT=0 -CPU_MAX_PERF_ON_BAT=70 - -# Set the CPU "turbo boost" (Intel) or "turbo core" (AMD) feature: -# 0=disable, 1=allow. -# Note: a value of 1 does *not* activate boosting, it just allows it. -# Default: - -CPU_BOOST_ON_AC=1 -CPU_BOOST_ON_BAT=0 - -# Set the Intel CPU HWP dynamic boost feature: -# 0=disable, 1=enable. -# Requires intel_pstate scaling driver in 'active' mode and Intel Core i -# 6th gen. or newer CPU. -# Default: - -CPU_HWP_DYN_BOOST_ON_AC=1 -CPU_HWP_DYN_BOOST_ON_BAT=0 - -# Select platform profile: -# performance, balanced, low-power. -# Controls system operating characteristics around power/performance levels, -# thermal and fan speed. Values are given in order of increasing power saving. -# Note: check the output of tlp-stat -p to determine availability on your -# hardware and additional profiles such as: balanced-performance, quiet, cool. -# Default: - -PLATFORM_PROFILE_ON_AC=performance -PLATFORM_PROFILE_ON_BAT=low-power - -# Set the min/max/turbo frequency for the Intel GPU. -# Possible values depend on your hardware. For available frequencies see -# the output of tlp-stat -g. -# Default: - -INTEL_GPU_MIN_FREQ_ON_AC=100 -INTEL_GPU_MIN_FREQ_ON_BAT=100 -INTEL_GPU_MAX_FREQ_ON_AC=1300 -INTEL_GPU_MAX_FREQ_ON_BAT=800 -INTEL_GPU_BOOST_FREQ_ON_AC=1300 -INTEL_GPU_BOOST_FREQ_ON_BAT=1100 - -# Wi-Fi power saving mode: on=enable, off=disable. -# Default: off (AC), on (BAT) - -#WIFI_PWR_ON_AC=off -WIFI_PWR_ON_BAT=off - -# PCIe Active State Power Management (ASPM): -# default(*), performance, powersave, powersupersave. -# (*) keeps BIOS ASPM defaults (recommended) -# Default: - -#PCIE_ASPM_ON_AC=default -PCIE_ASPM_ON_BAT=powersupersave - -# Exclude PCIe devices assigned to the listed drivers from Runtime PM. -# Note: this preserves the kernel driver default, to force a certain state -# use RUNTIME_PM_ENABLE/DISABLE instead. -# Separate multiple drivers with spaces. -# Default: "mei_me nouveau radeon", use "" to disable completely. - -RUNTIME_PM_DRIVER_DENYLIST="" - -# Make sure USB_AUTOSUSPEND is disabled because it is super annoying to use your computer with a not-functioning mouse and keyboard -USB_AUTOSUSPEND=0