AWS doesn't have real KVM and it seems that booting Centos Stream image using
TCG stopped working (TCG was actually never supported on EL). Let's switch
to using OpenStack that has KVM support.
Also, I bumped the terraform repository because the older version didn't have
centos stream on OpenStack.
Signed-off-by: Ondřej Budai <ondrej@budai.cz>
3a8c6c8a introduced a new logic for killing journalctl. Unfortunately, it
doesn't work properly. In ostree tests, multiple journalctls are spawned
but there can be only one trap active at a time. This caused all but the last
journalctls to hang indefinitely. Unfortunately, hanging background processes
is something that causes the GitLab CI to hang indefinitely as well.
This commit modifies the logic a bit: The trap is still set. However, there's
also an explicit kill of journalctl after the compose is finished. After the
process is successfully killed, the trap is removed.
Signed-off-by: Ondřej Budai <ondrej@budai.cz>
One occurrance of read_partition() call have not been modified as part of
previous commit [1], which is a bug.
[1] 598c2b6939
Signed-off-by: Tomas Hozza <thozza@redhat.com>
This is a preparation for defining EC2 images for RHEL-8.5.0. These
extensions to image-info tool represent modifications done to the
official EC2 images currently produced as RHEL release. It is important
to be able to analyse these aspects of images, before we define them in
osbuild-composer, to ensure that the resulting images will be consistent
with the current state.
- Read non-empty lines from /etc/hosts file and add them to the report.
- Read content of /etc/machine-id and add it to the report.
- Read uncommented key/values from /etc/systemd/logind.conf and add them
to the report.
- Read all ifcfg-* files from /etc/sysconfig/network-scripts/ and add
their values to the report.
- Read content of /etc/locale.conf and add it to the report.
- Read SELinux configuration from /etc/selinux/config and add it to the
report.
- Inspect the filesystem tree for SELinux context mismatches and add
them to the report.
- Read configuration files from /etc/modprobe.d/ and for now report only
all blacklisted kernel modules.
- Read RHSM configuration from /etc/rhsm/rhsm.conf and add it to the
report.
- Read cloud-init configuration from /etc/cloud/cloud.conf and add it to
the report.
- Read all *.conf files from /etc/dracut.conf.d/ and add their content to
the report.
- Read VC and X11 keyboard configuration and add it to the report.
- Read specific configuration directives from Chrony configuration and
add them to the report. Specifically 'server', 'pool', 'peer' and
'leapsectz'.
- Read drop-in configurations for *.service unit files from
/etc/systemd/system/ and add them to the report.
- Read all configuration files from /etc/tmpfiles.d/ and add them to the
report.
- Read all configuration files from /etc/sysctl.d/ and add them to the
report.
- Read the Tuned active profile and profile mode and add them to the
report.
- Read all configuration files from /etc/security/limits.d and add them
to the report.
- Read sudoers configuration from /etc/sudoers and files in
/etc/sudoers.d/ and add uncommented lines to the report. No
sophisticated parsing is done, because the configuration format
grammar is too complicated for the purpose of image-info.
- Read udev rules configuration files from /etc/udev/rules.d/ and add
them to the report.
- Read DNF configuration and defined vars and add them to the report.
- Read profile ID and enabled features used by authselect.
- Enable SELinux, extended attributes and POSIX ACLs support when
unpacking 'tar' image type to prevent potential mismatches
Regenerate all image test cases to reflect changes in the image-info
output. Modify the distro-arch-imagetype-map.json to cover all
combinations currently covered by existing image test cases.
Add doc strings to all read_* functions.
Signed-off-by: Tomas Hozza <thozza@redhat.com>
PIPELINE_ID is the same across different jobs running in the same
pipeline while BUILD_ID is unique for every job.
Note: In the case where we have 1 test script/runner
CI_BUILD_ID == CI_JOB_ID
composer doesn't support f34 or f35, but it should be possible to build
these even with the f33 distro definition. Introduce f34 and f35 repos
and aliases for f33.
Create a template to help us with the bug reporting process. This template includes a request for information we usually ask from the reporters. This way, they can include the information upfront.
Create an entry point for all regression test called "regression.sh" and
run it as part of the base tests for all our distros. This entry
point contains logic for running only the test cases that are
appropriate for a given distribution.
cloud-init was enabled explicitly in the image-factory kickstart and thus we
need to explicitly enable it too.
Fixes: rhbz#1960309
Fixes: COMPOSER-920
Signed-off-by: Ondřej Budai <ondrej@budai.cz>
All our images now support and have enabled cloud-init, there's no need
to explicitly enable it and install it in a kickstart.
Signed-off-by: Ondřej Budai <ondrej@budai.cz>
VHD images are meant for Azure and we indeed test if they're bootable in
test/cases/azure.sh . There's no reason to test them using libvirt anymore
so this commit just removes the test.
Signed-off-by: Ondřej Budai <ondrej@budai.cz>
Modify composer to use RepoRegistry, instead of loading the host
repositories, when initializing WeldrAPI.
Modify WeldrAPI to use RepoRegistry, instead of a map of repository
definitions. Make sure that the RepoRegistry method specific to image
type is used in Welder where appropriate. Specifically when depsolving a
Blueprint, which is used to build a specific image type. Update Weldr
API unit tests to reflect the change.
Add a new method to RepoRegistry, allowing to get list of repositories,
which should be used for building an image for a given architecture,
without specifying the exact image type. Add relevant unit tests.
Signed-off-by: Tomas Hozza <thozza@redhat.com>
Composer does not have 1:1 mapping of what can be the Host Distro name
and the names of supported distributions held in the Distroregistry.
The fact that the host distro `Name()` method as passed to the Weldr API
does not return the same name as what is used as distro name for
repository definitions. This makes it hard to use `distro.Distro` and
`distro.Arch` directly and rely on the values returned by them as their
name.
Add `New*HostDistro()` to all distro definitions, accepting the name
that should be returned by the distro's `Name()` method. This is useful
mainly if the host distro is Beta or Stream variant of the distro.
Change the distroregistry.Registry to contain host distro as a separate
value set when creating it using `New()` function. This value is
returned by `Registry.FromHost()` method. Determining the host distro is
handled by the `NewDefault()` function. Move the distro name mangling to
distroregistry package. Add relevant unit tests.
Signed-off-by: Tomas Hozza <thozza@redhat.com>
Extend the RepoConfig structure to contain new field ImageTypeTags.
Extend also other structures and functions as needed, to support loading
repository definitions, which use this new field. The idea is that a
repository should be used for building all image types, unless it has
some ImageTypeTags defined. In such case, it should be used only for
building the specific image types, which names are specified in the new
field.
Add RepoRegistry as a higher-level API to load and manage repository
definitions for each distribution. Currently it provides one method,
which returns a set of repositories needed to build a given image
type. The RepoRegistry uses the new ImageTypeTags field in the RepoConfig
structure and returns all the needed repositories for the image type.
Modify rpmmd unit tests and add unit tests for RepoRegistry.
Add News entry describing the change done to RepoConfig and its JSON
representation.
Signed-off-by: Tomas Hozza <thozza@redhat.com>
Separate the loading of repo definitions from JSON file from
`LoadRepositories()` to a standalone function
`loadRepositoriesFromFile()`, to make it easy to reuse it in the future.
Add unit tests for `LoadRepositories()` function.
Exclude github.com/osbuild/osbuild-composer/internal/rpmmd/test package
from test coverage. Package with just tests and no other code makes `go
test` to fail. This should be fixed in go 1.17.
See https://github.com/golang/go/issues/27333
Signed-off-by: Tomas Hozza <thozza@redhat.com>
fedoratest was yet another dummy distribution used by unit tests. After
the rework of test_distro, there is no reason to not use it as the only
distro implementation for testing purposes.
Remove fedoratest distro and replace it with test_distro in all affected
tests.
Signed-off-by: Tomas Hozza <thozza@redhat.com>
Extend the "Test Distro" implementation and definition to contain two
architectures and make the second architecture contain two image types.
Add New2() function returning another "Test Distro".
Modify the `internal/store` unit tests to reflect changes done to the
"Test Distro".
Signed-off-by: Tomas Hozza <thozza@redhat.com>
