This reverts commit 158acaac78.
With https://github.com/osbuild/bootc-image-builder/pull/238 the
original reason to call mknod goes away so we can just revert
it. osbuild now requires not only the loop device but also uses
`losetup --partscan` quite a lot now so the mknod approach becomes
impractical and the consumers of osbuild in a container should
just setup devtmpfs.
Since we support python3.6 we cannot assume that dicts are ordered
in any way. To ensure the `id` is still always valid we pass
sort_keys=True to json.dump().
Thanks to Simon!
Generate log messages with origin "org.osbuild.main" when
pipelines/stages start and finish. This way a higher level
frontend can display high level progress coming from this
origin and filter out e.g. stages based log messages (that
are usually quite technical as they are just stdout/stderr
from the stages).
Tweak the Progress class to be simpler. Given that progress does
not need to support arbitrary depth but only has a single level
the class now just exposes "sub_progress" to the caller.
When the main progress is advanced the sub_progress is now fully
deleted instead of just reset. The rational is that when the main
progress is done and advances a step it is very likely that a
new sub_progress is required and it's most likely an error if
the same sub_progress will get re-used.
This means that `reset()` can be removed as it's not used anymore
(and YAGNI). We can add it back when we have a use-case.
It also change the code so that "total" starts with 0 instead
of `None` (principle of least surprise). This means that now
`progress.incr()` is called in the JSONSeqMonitor() for
`finish()` and `result()` to indicate that the pipeline/stage
is finished.
This commit tweaks Context a bit so that any write will automatically
reset the `_id`. This ensures that we do not forget to reset `_id`
when the code changes.
It also tweaks the naming a bit, before there was a "setter" for
origin and functions to set "pipeline" and "stage". They are all
functions now with a "set_" prefix for symetry mostly.
The class LogLine() is purely used as a dataclass with no state
and the only function on it is `as_dict()`. This got refactored
into a new function `log_entry()` because there is no need for
this to be a class. The function that takes the same inputs.
This is a follow up to #1550 where we enabled a `rw` permissions mode,
which is not ideal since it would theoretically be possible to set both
`ro` and `rw` modes at the same time. This commit fixes the issue by only
allowing one option at a time.
Fixes#1588
The BLS specification [0] says the `options` field is optional and
can also appear multiple times. This commit tweaks the code to
deal with these corner cases and also adds tests that ensure that
this works correctly.
It also tweaks the file handling to be atomic.
[0] https://uapi-group.org/specifications/specs/boot_loader_specification/
The new `testutil.mock_command` context manager can be used to
mock commands in PATH and replace them with arbitrary shell
scripts. This is useful in testing to e.g. simulate exact error
conditions that would be hard to trigger otherwise or to replace
long running commands with faked results.
Example:
```
fake_cmd = textwrap.dedent("""\
do-something
""")
with mock_command("some-cmd", fake_cmd):
your_code
```
This adds a `default: true` option for all cases where OSTree
information is specified in schemas and allows for the information
to be picked up from the filesystem.
This is a safe operation because when building disk images there is
no known case where having two deployments makes sense. In the case
there ever were a case then the osname, ref, and serial options still
exist and can be used.
Co-authored-by: Luke Yang <luyang@redhat.com>
Co-authored-by: Michael Vogt <michael.vogt@gmail.com>
This commit adds code that will remove the least recently used
entries when a store() operation does not succeeds because the
cache is full. To be more efficient it will try to free
twice the requested size (this can be configured in the code).
This is a drive-by change after spending some quality time with the
mount code. The `id` field of `Mount` is calculated only once and
only when creating a `Mount`. This seems slightly dangerous as
any change to an attribute after creation will not update the
id. This means two options:
1. dynamically update the `id` on changes
2. forbid changes after the `id` is calculcated
I went with (2) but happy to discuss of course but it seems more
the spirit of the class.
It also does the same change for "devices.Device"
The test_libc_futimes_works() is failing under RHEL/Centos right
now. To make it more robust a tiny sleep and rounding of the
timestamps is introduced to ensure that we are not run into
floating point comaparison funnines.
The second part of the fix is to open the stamp_file in read-only
mode to ensure that the mtime is not modified by the open itself
which is what lead to the actual test failure.
Extract a new helper `make_fake_tree()` that generalizes the existing
helper `make_fake_input_tree()`. The later will always create the
content under `{basedir}/tree` which is convinient for input tree
based tests but too specialized when using it in different contexts.
The existing `make_fake_input_tree()` is preserved unchanged and
becomes just a tiny wrapper.
This commit allows to exclude preserving ownership from an object
export. This is required to fix the issue that on macOS the an
podman based workflow cannot export objects with preserving
ownerships.
Originally this was a `no_preserve: Optional[List[str]] = None)`
to be super flexible in what we pass to `cp` but then I felt like
YAGNI - if we need more we can trivially change this (internal)
API again :)
This helper can be used to implement a strategy to find the oldest
cache entries and evict them when the cache is full.
The implementation uses the `atime` of the per object `cache.lock`
file and ensures in `load()` that it's actually updated.
This commit adds mount output to the error raised by
FileSystemMountService.mount(). This is useful when running into
mount failures during osbuild runs.
The issue was discovered while debugging a mount failure for
osbuild-composer PR#3820. Initially osbuild PR#1490 was meant
to fix it but it turned out there is a third mount helper in
the code that was originally overlooked (sorry for that!).
While debugging a failure of osbuild-composer [0] on fc39 it was
noticed that a mount failure does not include the output of
the mount command:
```
File "/usr/lib/python3.12/site-packages/osbuild/mounts.py", line 78, in mount
path = client.call("mount", args)
^^^^^^^^^^^^^^^^^^^^^^^^^^
File "/usr/lib/python3.12/site-packages/osbuild/host.py", line 348, in call
ret, _ = self.call_with_fds(method, args)
^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
File "/usr/lib/python3.12/site-packages/osbuild/host.py", line 384, in call_with_fds
raise error
osbuild.host.RemoteError: CalledProcessError: Command '['mount', '-t', 'xfs', '-o', 'ro,norecovery', '--source', '/dev/rootvg/applv', '--target', '/tmp/tmpjtfmth56/app']' returned non-zero exit status 32.
File "/usr/lib/python3.12/site-packages/osbuild/host.py", line 268, in serve
reply, reply_fds = self._handle_message(msg, fds)
^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
File "/usr/lib/python3.12/site-packages/osbuild/host.py", line 301, in _handle_message
ret, fds = self.dispatch(name, args, fds)
^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
File "/usr/lib/python3.12/site-packages/osbuild/mounts.py", line 111, in dispatch
r = self.mount(args)
^^^^^^^^^^^^^^^^
File "/usr/lib/python3.12/site-packages/osbuild/mounts.py", line 160, in mount
subprocess.run(
File "/usr/lib64/python3.12/subprocess.py", line 571, in run
raise CalledProcessError(retcode, process.args,
```
which makes diagnostic errors harder of course. This commit adds
a test that ensures that mount output is visbile and also changes
the code to include it.
[0] https://github.com/osbuild/osbuild-composer/pull/3820
When loop.Loop() is called and a new loop device must be allocated
there is no gurantee that the correct device node is available on
the system. In containers /dev is often just a tmpfs with static
device nodes. So when /dev/loopN is not available when the
container is created the device node will be missing even if
`get_unbound()` create a new loop device for us.
This commit ensures that the device node is available. It creates
it unconditionally and ignores any EEXIST errors to ensure there
is no TOCTOU issue.
Note that the test could have passed a `Loop(dir_fd=open(tmpdir))`
instead of creating/patching loop.DEV_PATH but it seems slightly
nicer to test the flow without a custom dir_path as this is what
the real code that creates a loop device is also using.
When osbuild.loop.Loop calls `__init__()` it assigns the `self.fd`
on open. However if that open call fails for whatever reason
(not found, permissions) the cleanup in `__del__` will fail in
confusing ways because `self.fd` is not initialized yet. It
also prevents the correct error from getting reported. A tiny
test is added to ensure this does not regress.
This commit removes some unnecessary custom tmpdir() fixtures
and uses the pytest buildin tmp_path instead.
Some custom tmpdir fixtures are left in place as they configure
the tmp location to be under `/var/tmp` which is not trivial to
do with pytests `tmp_path`. Not sure or not if the is a deep
reason there for using /var/tmp. I assume it's to ensure that
the tests run on a real FS not on a potential tmpfs but I don't
have the full background so didn't want to change anything.
This commit adds `osbuild.testutil.imports.import_module_from_path`
that can be used to import arbitrary python source files. This
allows importing files from the stages directory that have a
non python friendly filename like `org.osbuild.kickstart`.
Add conditional skip to some tests that depend on rpm-ostree
availability, but were not checking for its presence. These tests would
previously fail if rpm-ostree is not available. They will be skipped
now.
Signed-off-by: Tomáš Hozza <thozza@redhat.com>
